Honor Pigments

SHANGHAI HONOR INDUSTRIAL CO.,LTD.

PIGMENT YELLOW 191/ HP YELLOW 1349

PIGMENT YELLOW 191/ HP YELLOW 1349

C.I.NO.: PY191

Advantage:

Main Application Recommended: Plastics

Description

Product Description – PY191

HP YELLOW 1349 (PIGMENT YELLOW 191) is a monoazo calcium pigment lake with a reddish shade of yellow. It features excellent heat resistance, withstanding temperatures up to 300°C, good light fastness, and does not affect the shrinkage of polymers. It exhibits excellent solvent fastness in both aliphatic and aromatic hydrocarbons, as well as in commonly used plasticizers. It is widely applied in the plastics industry, including for materials such as HDPE, PVC, ABS, PC, PBT, and PP Fiber. Additionally, it is FDA-approved.

Recommended Application

Plastics: PP, PE, PVC, PS/SAN, ABS, PC, POM, PBT, PMMA, Rubber/TPV, SBC, TPO, TPU

Technical Data

Product Information
Chemical TypeMonoAzoCAS NO.129423-54-7
C. I. NamePigment Yellow 191EINECS / ELINCS NO.403-530-4
C. I. Constitution No.18795Chemical FormulaC17H13ClN4O7S2Ca
Technical Performance
Full ShadeTint
Weather Resistance54-5Heat Stability °C300°C
Light Fastness76
Physical Properties
Physical FormPowderResistance to Acid5
Specific Density (g/cm3):1.45 ± 0.1Resistance to Alkali5
Specific Surface(㎡/g):27Migration resistance PVC5
Oil Absorption45 ± 10Low warping applicationsSuitable
pH Value5 ~ 8
Volatile Matter1% max
Packaging
10kgs/bag   400kgs/Pallet
StorageShelf Life5 years
Should be stored in cool, dry and ventilate place.
TRANSPORTATION
Avoid inversion, sunlight, moisture and crash. Avoid damage the package.
  • Light fastness: Light fastness rating is assessed on 1 to 8 Blue Wool scale where 1 = ‘Poor’ and 8 = ‘Excellent’.
  • Heat Stability : Heat stability values given indicate the maximum temperature at which the pigment can be stoved for 10 min. on the full shade and in reductions without undergoing any significant change in shade.
  • Oil absorption: The oil absorption is determined on the basis of EN ISO 787-5 and given in g linseed oil per 100 gm. pigment.
  • Solvent bleeding: The bleeding in solvents is tested using the powder grades and the visual rating given on 1 to 5 Grey scale
    where 1 = ‘Heavy bleeding’ and 5 = ‘No bleeding”

Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Sudarshan’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.

Related products

Leave Your Message