Honor Pigments

SHANGHAI HONOR INDUSTRIAL CO.,LTD.

PIGMENT YELLOW 139/ HP YELLOW 1696

PIGMENT YELLOW 139/ HP YELLOW 1696

C.I.NO.: PY139

Advantage:

Main Application Recommended: Coatings

Description

Product Description -PY139

HP YELLOW 1696 (PIGMENT YELLOW 139) is a reddish – yellow pigment. It is widely used in paints and printing inks. It exhibits a wide variety of particle – size distributions and, accordingly, demonstrates highly diverse coloristic properties, especially in terms of hiding power. It is an opaque version and allows for an increase in pigment concentration without negatively affecting the gloss of the products.

Recommended Application

Coatings: solvent based coatings, water based coatings, auto paints, industrial coatings, powder coatings, coil coatings, wood coatings
Printing inks: offset inks, solvent based inks, water based inks

Technical Data:

Product Information
Chemical TypeIsoindolineCAS NO.36888-99-0
C. I. NamePigment Yellow 139EINECS / ELINCS NO.253-256-2
C. I. Constitution No.56298Chemical FormulaC16H9N5O6
Technical Performance
Full ShadeTint
Weather Resistance55Heat Stability °C250°C
Light Fastness88
Physical Properties
Physical FormPowderResistance to Acid5
Specific Density (g/cm3):1.74 ± 0.1Resistance to Alkali4
Specific Surface(㎡/g):22
Oil Absorption45 – 69
pH Value6.5 – 8.0
Volatile Matter1% max
Packaging
10kgs/bag   300kgs/Pallet
StorageShelf Life5 years
Should be stored in cool, dry and ventilate place.
TRANSPORTATION
Avoid inversion, sunlight, moisture and crash. Avoid damage the package.
  • Light fastness: Light fastness rating is assessed on 1 to 8 Blue Wool scale where 1 = ‘Poor’ and 8 = ‘Excellent’.
  • Heat Stability: Heat stability values given indicate the maximum temperature at which the pigment can be stoved for 10 min. on the full shade and in reductions without undergoing any significant change in shade.
  • Oil absorption: The oil absorption is determined on the basis of EN ISO 787-5 and given in g linseed oil per 100 gm. pigment.
  • Solvent bleeding: The bleeding in solvents is tested using the powder grades and the visual rating given on 1 to 5 Grey scale
    where 1 = ‘Heavy bleeding’ and 5 = ‘No bleeding”

Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Sudarshan’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.

Related products

Leave Your Message